The 179D commercial buildings energy efficiency tax deduction primarily enables building owners to claim a tax deduction for installing qualifying systems and buildings. Tenants may be eligible if they make construction expenditures. If the system or building is installed on federal, state, or local government property, the 179D tax deduction may be taken by the person primarily responsible for the system’s design. The systems and buildings must have been placed in service by December 31, 2017, which is when 179D expires. Deductions are taken in the year in which systems and buildings are placed in service. The 179D tax deduction has been in effect since January 1, 2006.
A tax deduction of $1.80 per square foot is available to owners of new or existing buildings who install (1) interior lighting; (2) building envelope, or (3) heating, cooling, ventilation, or hot water systems that reduce the building’s total energy and power cost by 50% or more in comparison to a building meeting minimum requirements set by ASHRAE Standard 90.1-2001 (for buildings and systems placed in service before January 1, 2016) or 90.1-2007 (for buildings and systems placed in service before January 1, 2017). Energy savings must be calculated using qualified computer software, which we link to below.
Deductions of $0.60 per square foot are available to owners of buildings in which individual lighting, building envelope, or heating and cooling systems that partially qualify be meeting certain target levels or through the interim lighting rule. These three compliance pathways are shown in the table below.
* Savings refer to the reduction in the energy and power costs of the combined energy for the interior lighting, HVAC, and HW systems as compared to a reference building that meets the minimum requirements of ASHRAE Standard 90.1-2001 for buildings placed in service prior to 1/1/2016 and ASHRAE Standard 90.1-2007 for buildings placed in service on or after 1/1/2016.
** The tax deduction is prorated depending on the reduction in LPD. See IRS Notice 2006-52 for the definition of "applicable percentage."
Below are links to qualified software and reference buildings that are required to calculate your tax deduction. Because the minimum requirements differ based on the year the system or building is placed in service, different software is applicable for systems and buildings placed in service before 2016, and those placed in service in 2016. The links are organized as such below.
Systems and Buildings Placed in Service Before 2016
DOE 179D Calculator You may have used the 179D DOE Calculator if your system or building was placed in service before January 1, 2016. The 179D calculator is no longer available on this website. If there are questions about the 179D calculator applied to previous tax filings, please send an email firstname.lastname@example.org.
Qualified Software You must use one of these qualified software tools to model your project if you can’t use the 179D DOE Calculator. Internal Revenue Service (IRS) regulations require that you use either the 179D DOE Calculator or other approved qualified software.
Systems and Buildings Placed in Service on or After January 1, 2016
Qualified Software DOE has established a process for qualifying software for modeling systems and buildings placed in service on or after January 1, 2016. The webpage lists qualifying software as it becomes available.
IRS Notice 2006-52established a process to allow taxpayers to obtain a certification that the property satisfies the energy efficiency requirements contained in 26 U.S.C 179D.
IRS Notice 2008-40sets forth additional guidance relating to the deduction for energy efficient commercial buildings under 26 U.S.C. 179D and is intended to be used with Notice 2006-52.
IRS Notice 2012-26providing an additional set of energy savings percentages that taxpayers may use to qualify for a partial 179D deduction under the permanent rule for property placed in service on or after the effective date of the notice.
Article by Office of Energy Efficiency and Renewable Energy *179D Bill has not passed yet, but is set to pass in 2020. Businesses are still able to apply for this deduction and will see the benefits once this has passed.
Any and all information regarding products, pricing, quotes, savings and or any other benefits regarding NRG Savers products, and services are subject to change and may change at any time. *Estimated savings based off the average customer's monthly savings.